Anope 1.8.9.3131 - BotServ
    Catalan . German . English . Spanish . French . Greek . Hungarian . Italian . Dutch . Polish . Portuguese . Russian . Turkish .
    | NickServ | ChanServ | OperServ | MemoServ | HostServ | BotServ |

  • HELP
    	BotServ allows you to have a bot on your own channel.
    	It has been created for users that can't host or
    	configure a bot, or for use on networks that don't
    	allow users' bot. Available commands are listed
    	below; to use them, type /msg BotServ command.  For
    	more information on a specific command, type /msg 
    	BotServ HELP command.
    
    
    
  • BOTLIST
    	Syntax: /msg BotServ BOTLIST
     
    	Syntax: BOTLIST
    
    	Lists all available bots on this network.
    
    
  • ASSIGN
    	Syntax: /msg BotServ ASSIGN chan nick
     
    	Syntax: ASSIGN chan nick
    
    	Assigns a bot pointed out by nick to the channel chan. You
    	can then configure the bot for the channel so it fits
    	your needs.
    
    
  • UNASSIGN
    	Syntax: /msg BotServ UNASSIGN chan
     
    	Syntax: UNASSIGN chan
    
    	Unassigns a bot from a channel. When you use this command,
    	the bot won't join the channel anymore. However, bot
    	configuration for the channel is kept, so you will always
    	be able to reassign a bot later without have to reconfigure
    	it entirely.
    
    
  • INFO
    	Syntax: /msg BotServ INFO {chan | nick}
     
    	Syntax: INFO {chan | nick}
    
    	Allows you to see BotServ information about a channel or a bot.
    	If the parameter is a channel, then you'll get information
    	such as enabled kickers. If the parameter is a nick,
    	you'll get information about a bot, such as creation
    	time or number of channels it is on.
    
    
  • SET
    	Syntax: /msg BotServ SET (channel | bot) option parameters
     
    	Syntax: SET (channel | bot) option parameters
    
    	Configures bot options.  option can be one of:
    
    	    DONTKICKOPS      To protect ops against bot kicks
    	    DONTKICKVOICES   To protect voices against bot kicks
    	    GREET            Enable greet messages
    	    FANTASY          Enable fantaisist commands
    	    SYMBIOSIS        Allow the bot to act as a real bot
    
    	Type /msg BotServ HELP SET option for more information
    	on a specific option.
    
    	Note: access to this command is controlled by the
    	level SET.
    
    
  • SET DONTKICKOPS
    	Syntax: /msg BotServ SET channel DONTKICKOPS {ON|OFF}
     
    	Syntax: SET channel DONTKICKOPS {ON|OFF}
    
    	Enables or disables ops protection mode on a channel.
    	When it is enabled, ops won't be kicked by the bot
    	even if they don't match the NOKICK level.
    
    
  • SET DONTKICKVOICES
    	Syntax: /msg BotServ SET channel DONTKICKVOICES {ON|OFF}
     
    	Syntax: SET channel DONTKICKVOICES {ON|OFF}
    
    	Enables or disables voices protection mode on a channel.
    	When it is enabled, voices won't be kicked by the bot
    	even if they don't match the NOKICK level.
    
    
  • SET FANTASY
    	Syntax: /msg BotServ SET channel FANTASY {ON|OFF}
     
    	Syntax: SET channel FANTASY {ON|OFF}
    
    	Enables or disables fantasy mode on a channel.
    	When it is enabled, users will be able to use
    	commands !op, !deop, !voice, !devoice,
    	!kick, !kb, !unban, !seen on a channel (find how
    	to use them; try with or without nick for each,
    	and with a reason for some?).
    
    	Note that users wanting to use fantaisist
    	commands MUST have enough level for both
    	the FANTASIA and another level depending
    	of the command if required (for example, to use
    	!op, user must have enough access for the OPDEOP
    	level).
    
    
  • SET GREET
    	Syntax: /msg BotServ SET channel GREET {ON|OFF}
     
    	Syntax: SET channel GREET {ON|OFF}
    
    	Enables or disables greet mode on a channel.
    	When it is enabled, the bot will display greet
    	messages of users joining the channel, provided
    	they have enough access to the channel.
    
    
  • SET SYMBIOSIS
    	Syntax: /msg BotServ SET channel SYMBIOSIS {ON|OFF}
     
    	Syntax: SET channel SYMBIOSIS {ON|OFF}
    
    	Enables or disables symbiosis mode on a channel.
    	When it is enabled, the bot will do everything
    	normally done by BotServ on channels, such as MODEs,
    	KICKs, and even the entry message.
    
    
  • KICK
    	Syntax: /msg BotServ KICK channel option parameters
     
    	Syntax: KICK channel option parameters
    
    	Configures bot kickers.  option can be one of:
    
    	    BOLDS         Sets if the bot kicks bolds
    	    BADWORDS      Sets if the bot kicks bad words
    	    CAPS          Sets if the bot kicks caps
    	    COLORS        Sets if the bot kicks colors
    	    FLOOD         Sets if the bot kicks flooding users
    	    REPEAT        Sets if the bot kicks users who repeat
    	                       themselves
    	    REVERSES      Sets if the bot kicks reverses
    	    UNDERLINES    Sets if the bot kicks underlines
    
    	Type /msg BotServ HELP KICK option for more information
    	on a specific option.
    
    	Note: access to this command is controlled by the
    	level SET.
    
    
  • KICK BOLDS
    	Syntax: /msg BotServ KICK channel BOLDS {ON|OFF} [ttb]
     
    	Syntax: KICK channel BOLDS {ON|OFF} [ttb]
    
    	Sets the bolds kicker on or off. When enabled, this
    	option tells the bot to kick users who use bolds.
    
    	ttb is the number of times a user can be kicked
    	before it get banned. Don't give ttb to disable
    	the ban system once activated.
    
    
  • KICK COLORS
    	Syntax: /msg BotServ KICK channel COLORS {ON|OFF} [ttb]
     
    	Syntax: KICK channel COLORS {ON|OFF} [ttb]
    
    	Sets the colors kicker on or off. When enabled, this
    	option tells the bot to kick users who use colors.
    
    	ttb is the number of times a user can be kicked
    	before it get banned. Don't give ttb to disable
    	the ban system once activated.
    
    
  • KICK REVERSES
    	Syntax: /msg BotServ KICK channel REVERSES {ON|OFF} [ttb]
     
    	Syntax: KICK channel REVERSES {ON|OFF} [ttb]
    
    	Sets the reverses kicker on or off. When enabled, this
    	option tells the bot to kick users who use reverses.
    
    	ttb is the number of times a user can be kicked
    	before it get banned. Don't give ttb to disable
    	the ban system once activated.
    
    
  • KICK UNDERLINES
    	Syntax: /msg BotServ KICK channel UNDERLINES {ON|OFF} [ttb]
     
    	Syntax: KICK channel UNDERLINES {ON|OFF} [ttb]
    
    	Sets the underlines kicker on or off. When enabled, this
    	option tells the bot to kick users who use underlines.
    
    	ttb is the number of times a user can be kicked
    	before it get banned. Don't give ttb to disable
    	the ban system once activated.
    
    
  • KICK CAPS
    	Syntax: /msg BotServ KICK channel CAPS {ON|OFF} [ttb [min [percent]]]
     
    	Syntax: KICK channel CAPS {ON|OFF} [ttb [min [percent]]]
    
    	Sets the caps kicker on or off. When enabled, this
    	option tells the bot to kick users who are talking in
    	CAPS.
    
    	The bot kicks only if there are at least min caps
    	and they constitute at least percent%% of the total
    	text line (if not given, it defaults to 10 characters
    	and 25%%).
    
    	ttb is the number of times a user can be kicked
    	before it get banned. Don't give ttb to disable
    	the ban system once activated.
    
    
  • KICK FLOOD
    	Syntax: /msg BotServ KICK channel FLOOD {ON|OFF} [ttb [ln [secs]]]
     
    	Syntax: KICK channel FLOOD {ON|OFF} [ttb [ln [secs]]]
    
    	Sets the flood kicker on or off. When enabled, this
    	option tells the bot to kick users who are flooding
    	the channel using at least ln lines in secs seconds
    	(if not given, it defaults to 6 lines in 10 seconds).
    
    	ttb is the number of times a user can be kicked
    	before it get banned. Don't give ttb to disable
    	the ban system once activated.
    
    
  • KICK REPEAT
    	Syntax: /msg BotServ KICK #channel REPEAT {ON|OFF} [ttb [num]]
     
    	Syntax: KICK #channel REPEAT {ON|OFF} [ttb [num]]
    
    	Sets the repeat kicker on or off. When enabled, this
    	option tells the bot to kick users who are repeating
    	themselves num times (if num is not given, it
    	defaults to 3).
    
    	ttb is the number of times a user can be kicked
    	before it get banned. Don't give ttb to disable
    	the ban system once activated.
    
    
  • KICK BADWORDS
    	Syntax: /msg BotServ KICK #channel BADWORDS {ON|OFF} [ttb]
     
    	Syntax: KICK #channel BADWORDS {ON|OFF} [ttb]
    
    	Sets the bad words kicker on or off. When enabled, this
    	option tells the bot to kick users who say certain words
    	on the channels.
    
    	You can define bad words for your channel using the
    	BADWORDS command. Type /msg BotServ HELP BADWORDS for
    	more information.
    
    	ttb is the number of times a user can be kicked
    	before it get banned. Don't give ttb to disable
    	the ban system once activated.
    
    
  • BADWORDS
    	Syntax: /msg BotServ BADWORDS channel ADD word [SINGLE | START | END]
     
    	Syntax: BADWORDS channel ADD word [SINGLE | START | END]
    	        BADWORDS channel DEL {word | entry-num | list}
    	        BADWORDS channel LIST [mask | list]
    	        BADWORDS channel CLEAR
    
    	Maintains the bad words list for a channel. The bad
    	words list determines which words are to be kicked
    	when the bad words kicker is enabled. For more information,
    	type /msg BotServ HELP KICK BADWORDS.
    
    	The BADWORDS ADD command adds the given word to the
    	badword list. If SINGLE is specified, a kick will be
    	done only if a user says the entire word. If START is
    	specified, a kick will be done if a user says a word
    	that starts with word. If END is specified, a kick
    	will be done if a user says a word that ends with
    	word. If you don't specify anything, a kick will
    	be issued every time word is said by a user.
    
    	The BADWORDS DEL command removes the given word from the
    	bad words list.  If a list of entry numbers is given, those
    	entries are deleted.  (See the example for LIST below.)
    
    	The BADWORDS LIST command displays the bad words list.  If
    	a wildcard mask is given, only those entries matching the
    	mask are displayed.  If a list of entry numbers is given,
    	only those entries are shown; for example:
    
    	   BADWORDS #channel LIST 2-5,7-9
    	      Lists bad words entries numbered 2 through 5 and
    	      7 through 9.
    
    	The BADWORDS CLEAR command clears all entries of the
    	bad words list.
    
    
  • SAY
    	Syntax: /msg BotServ SAY channel text
     
    	Syntax: SAY channel text
    
    	Makes the bot say the given text on the given channel.
    
    
  • ACT
    	Syntax: /msg BotServ ACT channel text
     
    	Syntax: ACT channel text
    
    	Makes the bot do the equivalent of a "/me" command
    	on the given channel using the given text.
    
    
    
  • SERVADMIN BOT
    	Syntax: /msg BotServ BOT ADD nick user host real
     
    	Syntax: BOT ADD nick user host real
    	        BOT CHANGE oldnick newnick [user [host [real]]]
    	        BOT DEL nick
    
    	Allows Services admins to create, modify, and delete
    	bots that users will be able to use on their own
    	channels.
    
    	BOT ADD adds a bot with the given nickname, username,
    	hostname and realname. Since no integrity checks are done
    	for these settings, be really careful.
    	BOT CHANGE allows to change nickname, username, hostname
    	or realname of a bot without actually delete it (and all
    	the data associated with it).
    	BOT DEL removes the given bot from the bot list.
    
    	Note: you cannot create a bot that has a nick that is
    	currently registered. If an unregistered user is currently
    	using the nick, they will be killed.
    
    
  • SERVADMIN SET
    
    	These options are reserved to Services admins:
    
    	    NOBOT            Prevent a bot from being assigned to
    	                        a channel
    	    PRIVATE          Prevent a bot from being assigned by
    	                        non IRC operators
    
    
  • SERVADMIN SET NOBOT
    	Syntax: /msg BotServ SET channel NOBOT {ON|OFF}
     
    	Syntax: SET channel NOBOT {ON|OFF}
    
    	This option makes a channel be unassignable. If a bot
    	is already assigned to the channel, it is unassigned
    	automatically when you enable the option.
    
    
  • SERVADMIN SET PRIVATE
    	Syntax: /msg BotServ SET bot-nick PRIVATE {ON|OFF}
     
    	Syntax: SET bot-nick PRIVATE {ON|OFF}
    
    	This option prevents a bot from being assigned to a
    	channel by users that aren't IRC operators.