Anope 1.8.9.3131 - MemoServ
    Catalan . German . English . Spanish . French . Greek . Hungarian . Italian . Dutch . Polish . Portuguese . Russian . Turkish .
    | NickServ | ChanServ | OperServ | MemoServ | HostServ | BotServ |

  • SEND
    	Syntax: /msg MemoServ SEND {nick | channel} memo-text
     
    	Syntax: SEND {nick | channel} memo-text
    
    	Sends the named nick or channel a memo containing
    	memo-text.  When sending to a nickname, the recipient will
    	receive a notice that he/she has a new memo.  The target
    	nickname/channel must be registered.
    
    
  • SENDALL
    	Syntax: /msg MemoServ SENDALL memo-text
     
    	Syntax: SENDALL memo-text
    
    	Sends all registered users a memo containing memo-text.
    
    
  • CANCEL
    	Syntax: /msg MemoServ CANCEL {nick | channel}
     
    	Syntax: CANCEL {nick | channel}
    
    	Cancels the last memo you sent to the given nick or channel,
    	provided it has not been read at the time you use the command.
    
    
  • CHECK
    	Syntax: /msg MemoServ CHECK nick
     
    	Syntax: CHECK nick
    
    	Checks whether the _last_ memo you sent to nick has been read
    	or not. Note that this does only work with nicks, not with chans.
    
    
  • LIST
    	Syntax: /msg MemoServ LIST [channel] [list | NEW]
     
    	Syntax: LIST [channel] [list | NEW]
    
    	Lists any memos you currently have.  With NEW, lists only
    	new (unread) memos.  Unread memos are marked with a "*"
    	to the left of the memo number.  You can also specify a list
    	of numbers, as in the example below:
    
    	   LIST 2-5,7-9
    	      Lists memos numbered 2 through 5 and 7 through 9.
    
    
  • READ
    	Syntax: /msg MemoServ READ [channel] {num | list | LAST | NEW}
     
    	Syntax: READ [channel] {num | list | LAST | NEW}
    
    	Sends you the text of the memos specified.  If LAST is
    	given, sends you the memo you most recently received.  If
    	NEW is given, sends you all of your new memos.  Otherwise,
    	sends you memo number num.  You can also give a list of
    	numbers, as in this example:
    
    	   READ 2-5,7-9
    	      Displays memos numbered 2 through 5 and 7 through 9.
    
    
  • RSEND
    	Syntax: /msg MemoServ RSEND {nick | channel} memo-text
     
    	Syntax: RSEND {nick | channel} memo-text
    
    	Sends the named nick or channel a memo containing
    	memo-text.  When sending to a nickname, the recipient will
    	receive a notice that he/she has a new memo.  The target
    	nickname/channel must be registered.
    	Once the memo is read by its recipient, an automatic notification
    	memo will be sent to the sender informing him/her that the memo
    	has been read.
    
    
  • DEL
    	Syntax: /msg MemoServ DEL [channel] {num | list | LAST | ALL}
     
    	Syntax: DEL [channel] {num | list | LAST | ALL}
    
    	Deletes the specified memo or memos.  You can supply
    	multiple memo numbers or ranges of numbers instead of a
    	single number, as in the second example below.
    
    	If LAST is given, the last memo will be deleted.
    	If ALL is given, deletes all of your memos.
    
    	Examples:
    
    	   DEL 1
    	      Deletes your first memo.
    
    	   DEL 2-5,7-9
    	      Deletes memos numbered 2 through 5 and 7 through 9.
    
    
  • SET
    	Syntax: /msg MemoServ SET option parameters
     
    	Syntax: SET option parameters
    
    	Sets various memo options.  option can be one of:
    
    	    NOTIFY      Changes when you will be notified about
    	                    new memos (only for nicknames)
    	    LIMIT       Sets the maximum number of memos you can
    	                    receive
    
    	Type /msg MemoServ HELP SET option for more information
    	on a specific option.
    
    
  • SET NOTIFY
    	Syntax: /msg MemoServ SET NOTIFY {ON | LOGON | NEW | MAIL | NOMAIL | OFF}
     
    	Syntax: SET NOTIFY {ON | LOGON | NEW | MAIL | NOMAIL | OFF}
    
    	Changes when you will be notified about new memos:
    
    	    ON      You will be notified of memos when you log on,
    	               when you unset /AWAY, and when they are sent
    	               to you.
    	    LOGON   You will only be notified of memos when you log
    	               on or when you unset /AWAY.
    	    NEW     You will only be notified of memos when they
    	               are sent to you.
    	    MAIL    You will be notified of memos by email aswell as
    	               any other settings you have.
    	    NOMAIL  You will not be notified of memos by email.
    	    OFF     You will not receive any notification of memos.
    
    	ON is essentially LOGON and NEW combined.
    
    
  • SET LIMIT
    	Syntax: /msg MemoServ SET LIMIT [channel] limit
     
    	Syntax: SET LIMIT [channel] limit
    
    	Sets the maximum number of memos you (or the given channel)
    	are allowed to have. If you set this to 0, no one will be
    	able to send any memos to you.  However, you cannot set
    	this any higher than %d.
    
    
  • INFO
    	Syntax: /msg MemoServ INFO [channel]
     
    	Syntax: INFO [channel]
    
    	Displays information on the number of memos you have, how
    	many of them are unread, and how many total memos you can
    	receive.  With a parameter, displays the same information
    	for the given channel.
    
    
  • STAFF
    	Syntax: /msg MemoServ STAFF memo-text
     
    	Syntax: STAFF memo-text
    
    	Sends all services staff a memo containing memo-text.
    	Note: If you have opers on both the oper list and the
    	admin list they will receive the memo twice.  The same
    	applies for oper's on the Root list as well as other
    	lists.
    
    
  • SERVADMIN SET LIMIT
    	Syntax: /msg MemoServ SET LIMIT [user | channel] {limit | NONE} [HARD]
     
    	Syntax: SET LIMIT [user | channel] {limit | NONE} [HARD]
    
    	Sets the maximum number of memos a user or channel is
    	allowed to have.  Setting the limit to 0 prevents the user
    	from receiving any memos; setting it to NONE allows the
    	user to receive and keep as many memos as they want.  If
    	you do not give a nickname or channel, your own limit is
    	set.
    
    	Adding HARD prevents the user from changing the limit.  Not
    	adding HARD has the opposite effect, allowing the user to
    	change the limit (even if a previous limit was set with
    	HARD).
    
    	This use of the SET LIMIT command is limited to Services
    	admins.  Other users may only enter a limit for themselves
    	or a channel on which they have such privileges, may not
    	remove their limit, may not set a limit above %d, and may
    	not set a hard limit.
    
    
  • SERVADMIN INFO
    	Syntax: /msg MemoServ INFO [nick | channel]
     
    	Syntax: INFO [nick | channel]
    
    	Without a parameter, displays information on the number of
    	memos you have, how many of them are unread, and how many
    	total memos you can receive.
    
    	With a channel parameter, displays the same information for
    	the given channel.
    
    	With a nickname parameter, displays the same information
    	for the given nickname.  This use limited to Services
    	admins.